Please Whitelist This Site? I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :) If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads. If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK. Thanks for your understanding! Sincerely, Charles Kozierok Author and Publisher, The TCP/IP Guide

NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The TCP/IP Guide  9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)       9  TCP/IP Internet Layer (OSI Network Layer) Protocols            9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)                 9  Internet Protocol Version 4 (IP, IPv4)                      9  IP Addressing                           9  IP "Classful" (Conventional) Addressing

IP "Classful" Addressing Network and Host Identification and Address Ranges 1 IP Addresses With Special Meanings

In the preceding topics I introduced the concepts of IP address classes and showed how the classes related to ranges of IP addresses. Of the five classes, D and E are dedicated to special purposes, so I will leave those alone for now. Classes A, B and C are the ones actually assigned for normal (unicast) addressing purposes on IP internetworks, and therefore the primary focus of our continued attention.

As we've seen, they differ in the number of bits (and octets) used for the network ID compared to the host ID. The number of different networks possible in each class is a function of the number of bits assigned to the network ID, and likewise, the number of hosts possible in each network depends on the number of bits provided for the host ID. We must also take into account the fact that one, two or three of the bits in the IP address is used to indicate the class itself, so it is effectively "excluded" from use in determining the number of networks (though again, it is still part of the network ID).

Based on this information, we can calculate the number of networks in each class, and for each class, the number of host IDs per network. Table 45 shows the calculations.

Let's walk through one line of this table so we can see how it works. I'll stick with class B since it's "in the middle". The basic division is into 16 bits for network ID and 16 bits for host ID. However, the first two bits of all class B addresses must be "10”, so that leaves only 14 bits to uniquely identify the network ID. This gives us a total of 2¹⁴ or 16,384 class B network IDs. For each of these, we have 2¹⁶ host IDs, less two, for a total of 65,534.

Why less two? For each network ID, two host IDs cannot be used: the host ID with all zeroes and the ID with all ones. These are addresses with "special meanings" as described in the topic that follows. You will also notice that 2 has been subtracted from the number of network IDs for class A. This is because two of the class A network IDs (0 and 127) are reserved. There are actually several other address ranges that are set aside in all three of the classes that I haven't shown here. They are listed in the topic on reserved, private and loopback addresses. (The exclusion of 0 and 127 from class A is probably the best-known address range reservation which is why I am explicit with that one in the table above.)

As you can see, there is quite a disparity in the number of hosts available for each network in each of these classes. What happens if an organization needs 1,000 IP addresses? They have to either use four class Cs or use one class B (and in so doing waste over 90% of the possible addresses in the class B network.) Bear in mind that there are only about 16,000 class B network IDs available worldwide and you begin to understand one of the big problems with "classful" addressing.

IP "Classful" Addressing Network and Host Identification and Address Ranges 1 IP Addresses With Special Meanings